design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + ? f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svpa ? externals of ? gure are the reference. low esr (18 m max.) high ripple (4240 ma.r.m.s.) rohs compliance, halogen free marking unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 b6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 e7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 f8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 ?0.4 size code b6 c6 e7 f8 category temperature range ?55 c to +105 c rated voltage range 2.5 v.dc to 20 v.dc 2.5 v.dc to 16 v.dc rated capacitance range 10 f to 82 f 22 f to 180 f 47 f to 330 f 180 f to 820 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +105 c, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) dimensions (not to scale) features speci cations nov. 2015 01 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 ? 1 ripple current (100 khz/ +105 c ), ? 2 esr (100 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for ?reflow conditions? and ?taping specifications?. series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) svpa 2.5 82 5.0 5.9 b6 1970 30 0.12 300 2r5svpa82maa 1500 180 6.3 5.9 c6 2690 20 0.12 300 2R5SVPA180MAA 1000 330 8.0 6.9 e7 3370 20 0.12 500 2r5svpa330maa 1000 820 10.0 7.9 f8 4240 19 0.12 500 2r5svpa820m 500 4.0 68 5.0 5.9 b6 1970 30 0.12 300 4svpa68maa 1500 150 6.3 5.9 c6 2570 22 0.12 300 4svpa150maa 1000 270 8.0 6.9 e7 3220 22 0.12 500 4svpa270maa 1000 680 10.0 7.9 f8 4130 20 0.12 544 4svpa680m 500 6.3 47 5.0 5.9 b6 1970 30 0.12 300 6svpa47maa 1500 120 6.3 5.9 c6 2570 22 0.12 300 6svpa120maa 1000 220 8.0 6.9 e7 3220 22 0.12 500 6svpa220maa 1000 470 10.0 7.9 f8 4130 20 0.12 592 6svpa470m 500 10 68 6.3 5.9 c6 2200 30 0.12 300 10svpa68maa 1000 150 8.0 6.9 e7 2760 30 0.12 500 10svpa150maa 1000 330 10.0 7.9 f8 3770 24 0.12 660 10svpa330m 500 16 39 6.3 5.9 c6 2040 35 0.12 300 16svpa39maa 1000 6.3 5.9 2460 24 0.12 300 16svpa39maay 1000 82 8.0 6.9 e7 2760 30 0.12 262 16svpa82maa 1000 180 10.0 7.9 f8 3430 29 0.12 576 16svpa180m 500 20 10 5.0 5.9 b6 1700 40 0.12 80 20svpa10m 1500 22 6.3 5.9 c6 2040 35 0.12 88 20svpa22m 1000 47 8.0 6.9 e7 2630 33 0.12 188 20svpa47m 1000 frequency correction factor for ripple current characteristics list nov. 2015 01 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
